If you’re wondering even if it is or not you can apply oil-based repaint over latex, it really isn’t a smart decision, but it is possible. The reason specialists advise versus doing this is because latex repaint is flexible in nature, and also as a result, oil-based paints won’t properly adhere come them.

You are watching: Can oil based paint be used over latex


If the is not done properly, it renders a normal paint job take lot longer.

However, if friend sand the surface and apply a sealing coat such together primer in between the various layers, you can get by using oil-based paint over latex. Preparation is key. come successfully use oil-based paint over latex, follow the procedures below:

Step 1: Sand the surface

As formerly mentioned, latex is flexible in nature. As a result, oil-based paint won’t appropriately adhere to latex unless you sand the surface and include primer between each the the layers. Start by equipping yourself with a piece of P80 grit sandpaper and shot to eliminate as lot of the latex from the surface.

You can also use a sanding block. By removing the latex indigenous the surface, the oil-based repaint will adhere much better than if the latex to be left on. Make certain you sand the surface ar down till you gain a genuine matte look.

Step 2: Sand a small more

You’ll now want use 150 grit sandpaper and sand until you gain a surface that’s incredibly smooth. ~ the surface has actually been fully sanded, wipe far the dust left behind with a damp towel or a clean cloth and also let the surface to completely dry.

Step 3: Mask the area

Using a high quality masking tape, you’ll desire to mask anything friend don’t want accidentally painted. This can encompass things prefer the edges of adjoining walls, the edge of her cabinets, the edges of a irradiate switch, and so on. Masking help you obtain that really clean, sharp look when you’re perfect painting and everything is fully dried.

Step 4: use your primer

You have the choice between a water-based or acrylic primer. Every of these primers job-related well and have their pros and cons. Both water-based and acrylic primers develop the perfect isolating surface. After you have used the primer, and also it’s fully dried, you’ll desire to walk ahead and also apply a second coat. It’s necessary to make certain you covered every single piece that latex possible.

Step 5: apply top coat

You’ll need a container that oil-based optimal coat. This can be purchase at most home innovation stores. After you have used this solution, provide it adequate time to dry, and also if require be, apply an additional coat for premium coverage.

Step 6: eliminate all the masking tape

It’s best to eliminate all the masking tape prior to the paint completely dries. Remove the masking after ~ the repaint has fully dried can reason the paint to tear, break, or chip.

Can you repaint latex end oil-based paint?

Now that you know how use oil-based paint to latex, the concern remains. Deserve to you paint latex over oil-based paint? The prize is yes, but the thing you haver come remember is, when you use latex end an oil-based paint, the only means to eliminate it is to sand it off. The can become quite a nightmare, so make certain you gain it ideal the very first time.

If you perform decide to usage latex end an oil-based paint, you’ll likewise want come make certain you sand out any kind of glossy locations of the surface, and also make certain you use 100% acrylic latex. It’s also important to keep in mind that the much more you sand the surfaces, the better the acrylic repaint will stick to them. To efficiently paint latex over oil-based paint:

Step 1: Sand the surface

To certain the surface is totally sanded, and also make sure you don’t see any type of sort the shine. You’ll want to see an ext of a matte surface. This sanding have to be done through a 150 grit paper.

Step 2: Mask the bordering area

To make sure you acquire sharp, clean-cut edges, mask the neighboring area with a top quality masking tape. Eliminate the masking tape once you’re excellent painting and also the repaint is quiet moist. Like pointed out above, remove the masking tape as soon as the paint has totally dried deserve to chip, rip, or rest the paint off.

Step 3: use latex ‘conversion’ inside wall paint

Once the surface has actually been fully sanded, you’ll want to use a great of latex ‘conversion’ primer paint. Make sure you give it enough time come dry and you cover all locations of the surface ar you’re painting.

See more: What Shape Has 1 Pair Of Parallel Sides, Quadrilaterals

Step 4: apply your oil-based paint

Lastly, use your oil-based paint and also let it dry. As soon as the latex ‘conversion’ primer and also your oil-based paint mix, they enable your oil-based paint to adhere with no issues.