When contrasted to her car, motorcycles space decidedly simple machines, which make them one ideal beginning point for budding mechanics spring to gain their hands a little greasy without too much risk. Among the most basic maintenance jobs you deserve to perform ~ above a motorcycle is to adjust out the spark plugs. Replacing your spark plugs routinely helps ensure that your engine runs smoothly; beyond that, though, the procedure can additionally clue friend in to various other engine troubles that can need attention. For example, oil-covered spark plugs deserve to signal valve damage, and wet, fuel-fouled plugs can indicate the your carburetors must be tuned. Together for timing, the a great idea to readjust your spark plugs anytime you gain an oil change. As lengthy as the old plugs room in serviceable condition, you deserve to keep them about for emergencies.Depending top top the form of bike friend have, there might be as few as 2 or as many as 6 spark plugs. In most cases, the spark plugs are on peak of the engine under black color rubber “boots’” connected to thick black color wires. Store in mind the on some models, accessing all her spark plugs might involve removing plastic covers, fairing pieces, or even the gas tank.

You are watching: How many spark plugs does a motorcycle have

What You’ll Need

*
RatchetNew spark plugs

Step 1

Remove the spark plug cable by pulling turn off the cap. Carry out not traction on the wire together it can damage the link with her spark plug cap.

Step 2

Attach the spark plug socket to the ratchet and slip the socket over the spark plug, making certain that the plug is fully seated in the socket.Use the ratchet to turn the spark plug counter-clockwise till it’s loose and then complete removing it through your hand.

Step 3

*
Inspect the spark plug because that fouling suggested by oil, black deposits, ash, pitting, or various other damage. The spark plug should appear grey or yellowish in color, clean, and also dry. If the is corroded or fouled, consider getting a track up.

Step 4

*
Ensure that your brand-new spark plug is appropriately gapped. In stimulate to function properly in her motorcycle, the room between the floor electrode (hook-shaped optimal part) and the facility electrode (small steel cylinder exposed under the hook) needs to be precisely spaced out. You should have the ability to find the precise spacing in her motorcycle’s company manual, or by searching online. This is where the spark plug space tool is handy. These devices either use wires of differing thicknesses to measure the space or metal tabs. Merely insert the steel wire or tab right into the gap and also read the matching measurement.
*
Note: If you require to readjust the gap, most tools have a unique notch to aid bend the soil electrode up or down to reach the preferred gap.

Step 5

*
Thread the brand-new spark plugin by hand to ensure it seat properly.

Step 6

Note: The pictures used for actions 6 & 7 arerepeated from actions 2 & 1, because you’re basically just doing those steps in reverse.
Tighten the spark plug v the ratchet about a half-turn past hand-tight.

See more: How Much Is A Serving Of Goldfish, Are Goldfish Healthy

Step 7

Put the spark plug cap earlier on, and repeat with staying spark plugs.