Basic article on exactly how to resolve a tattoo power supply utilizing a vintage 2007 Hildbrandt pre-Spartan power supply together example. Us stumbled upon this damaged unit when we to be cleaning the end the workshop. I believe this was the one we provided to usage to quality check our machines. This vintage 2007 Hildbrandt was the predecessor to the Spartan, now with a LCD screen and some renovations to the transformer and also heat dispersion. Anyway, we’ll go over few of the most typical problems the occur.

You are watching: How to fix a tattoo power supply


Power Cord Dead

This typically happens once the wiring in the cord loser connectivity due to wear and also tear. For example, the Hildbrandt pre-Spartan had actually a detached wire that was claimed to it is in attached come the voltage switch, this most likely happened from who yanking ~ above the cord or unit when it was still attached to the wall. The easiest means to inspect if your strength cord is the trouble is through getting one more power cord to test your strength supply with. For most tattoo strength supplies, the cord (if that is detachable) is the very same detachable cord as your computer, common kitchen appliance or electronics. Grab an additional cord from one of those devices and also use it with the strength supply. If the unit works v the instead of cord, the difficulty was your strength cord. This problem is a common one. The Hildbrandt pre-Spartan unit we were addressing did not have actually a detachable cord yet when we opened it up, it was evident the power cord was unattached, so us soldered it back and the unit operated fine v the exemption that us no longer had the voltage knob for it.

Foot Pedal Problem

Foot pedals will certainly break or lose connectivity. Common problem is the wire that attaches the pedal to the power unit. If friend yank on the pedal or the wires obtain twisted because you kick it around, the copper wiring may break within the wire. The plug is a common place for the rest to occur. Inspect it through unscrewing the housing and also seeing if the an unfavorable and confident wires space still attached come the plug. If either one of those wires are detached or if the positive and negative is emotional each other, the pedal will not work. If they space touching, separate them. If one of two people one is not attached, solder the cable back. If girlfriend have an additional foot pedal handy, use that one to check to check out if the is certainly the foot pedal the is the problem. It is constantly best to keep at least 1 or 2 additional pedals roughly just in case, they room cheap to buy anyways.

Clip Cord Problem

Clip cord worries are the very same as foot pedal issues, the main problem is the wire the attaches the clip cord to the strength supply. Examine the mono plug the same means you go the foot pedal. If you have one more clip cord handy, usage that one to check to watch if the is certainly the clip cord the is the problem. That is always best to keep at the very least 1 or 2 extr clip cords around, lock don’t expense much anyways.

See more: How Does A Digit In The Ten Thousands Place Values, Ones To Ten Thousands


Taking apart the power Supply to resolve it

Taking personally the power supply to deal with it is a last resort. We opened up this Hildbrandt pre-Spartan and also found the issue automatically as we saw that a wire was not attached properly. Generally speaking, the just thing the is fixable when you open one up is detached wires. The is unlikely that the components will be fixable. Examine to check out if girlfriend still have actually warranty, if friend do, it might be much better to just send that in to obtain fixed as acquisition it apart may void the warranty. Our power supplies come v a 6 month warranty timed from the date of purchase.