I write-up sewing and crafting tutorials right here at the Mermaid’s Den. Ns love making things and sharing them with you, for this reason you have the right to make them, too.

You are watching: How to replace a zipper in a jacket


*


Don"t you dislike it when a zipper breaks, making a jacket unwearable? Luckily, it"s no that daunting to change a damaged zipper if you have the appropriate tools. I"m going to walk girlfriend through selecting the right kind that zipper, holding that in place, and also sewing that in. I"m walk to display you exactly how to replace a broken zipper through a sewing machine, but you have the right to sew this by hand as well.

Disclosure: This short article contains affiliate links, which method I might receive a percent if you make a purchase using this links. This won"t cost anything extra to you. Ns only link to points I like and use, and also the proceeds help me to run this blog. Give thanks to you for sustaining me!

Materials used:


Getting the best kind the zipper

I think this is the trickiest part. There room so many different type of zippers! You"ll want to acquire a separating zipper for her jacket. This means it opens up in ~ the bottom, so girlfriend can totally separate the 2 sides of your jacket. If you get a non-separating zipper, it"s not the end of the world, yet you"ll have to put your jacket on over her head rather of opening it up.

Next, you want to look because that a zipper the is precisely the same size as her old zipper. If friend can"t find that, gain one that"s longer than your present zipper. If you carry out this, you need to acquire a zipper with metal teeth, fairly than a nylon/plastic zipper. There space a few ways that shortening a zipper (see this tutorial native Craftsy), however you always shorten a nylon/plastic zipper native the bottom by sewing a few stitches over the teeth, producing a brand-new stop because that the zipper pull. Now you"ll run into the previous problem of needing to placed the coat on over her head because it doesn"t open up up. V a metal zipper, you have the right to shorten that from the top.

Getting the best size zipper

Zippers come in miscellaneous sizes, varying from 1-10 (smaller number = smaller sized zipper). These numbers describe the width (in millimeters) the the teeth on the zipper coil.Because you"re getting a separating zipper, that will practically certainly it is in the ideal size for a jacket, due to the fact that that is typically what separating zippers are provided for. However, dual check the size just to it is in sure. You want one in the 5-7 range.

How to replace a damaged zipper

First, eliminate the old zipper v your stitch ripper. There will probably be two rows of stitching holding that on each side.


*

On mine jacket, the zipper was also holding the lining come the exterior of the jacket. I tried simply folding both layers end and adding the brand-new zipper to the raw edge, however the layers were also slippery, and the zipper finished up being an extremely uneven. So ns folded the edge down and also stitched that before including the brand-new zipper. The building and construction of your jacket might differ, so execute what works ideal for you.


*

Keep the zipper zipped up because that now. Usage your wonder tape (double sided tape that"s for sure to darn through and dissolves in the wash) or fabric-safe adhesive to affix it to your jacket, leaving around 1/8" between the next of the jacket and the zipper teeth. Girlfriend can also pin the zipper to her jacket. I had actually trouble gettingthrough for this reason manythick layers through pins, so I taped mine. Ns think I"ll try fabric glue next time, though. Ns used tiny pieces the wonder tape, for this reason I can re-position the jacket as necessary. Because the fleece to be a tiny stretchy, the movedaround a bitwhile ns was sewing. I think fabric glue could have preserved it in place better.


Once you"ve taped/glued/pinned the zipper in place, check to check out that the bottom and top edges of the jacket room matched up. Enhance up any type of seams/pockets together well.


Now unzip your zipper. It will be much much easier to sew while it"s open, yet it"s much simpler to do sure everything is suitable up while it"s zipped.

See more: What Is The Circumference Of A 36 Inch Diameter Circle, Area Of A Circle (Video)


At first, ns tried utilizing a zipper foot, however the seam ~ above the edge of the jacket to be bulky, so I ended up utilizing an open toe embroidery foot instead. I kept the bulky seam in the middle, and the zipper come the side of the presser foot. This operated pretty well to store the spacing even.


As ns mentioned, the fleece stretched a little bit while sewing, so the zipper has a few small ripples, but overall, it"s not that noticeable, and the jacket deserve to be worn again!